The Master in Robotics and Advanced Construction (MRAC) seeks to train a new generation of interdisciplinary professionals who are capable of facing our growing need for a more sustainable and optimised construction ecosystem. The Master is focused on the emerging design and market opportunities arising from novel robotic and advanced manufacturing systems.
Through a mixture of seminars, workshops, and studio projects, the master programme challenges the traditional processes in the Construction Sector. It investigates how advances in robotics and digital fabrication tools change the way we build and develop processes and design tools for such new production methods.
Studio II_Anatomy of a System: RE_SHAPE
Introduction In a world where natural resources are increasingly scarce, the construction industry faces a crucial challenge: reducing material waste and maximizing the use of available resources. Wood, a traditionally used construction material, is at the center of this issue. Every year, millions of tons of wood are discarded or underutilized due to its irregular … Read more
Robotic Fabrication of Friction Based Timber Joinery
Robotic Fabrication of Friction-Based Timber Joinery: Burr Puzzle Assembly This research explores robotic assembly of friction-based interlocking timber joints using the burr puzzle as a case study. The puzzle’s tight tolerances and sequential assembly pose challenges. Through modeling and robotic execution, the study shows that while a single-robot approach is feasible, dual robots are necessary … Read more
Clay Spatial Printing II (Sensing for Detection)
Workflow for Detection (Transformation to the Real World) Test for getting the points in real world Workflow for Detection (Getting points into the Trajectory) Test for getting the points in real world Workflow for Detection (Processing on Point Cloud) Test for getting the points in real world Machina Connection for ABB_6700 (Simulation)
RE_SHAPE
Digital Transformation of Discarded Logs for Structural and Design Applications Re_Shape is a design and innovation project that addresses a major blind spot in the forestry industry: the waste of tree trunks that are curved, bifurcated, or otherwise irregular and therefore excluded from traditional processing systems. These logs are typically downgraded into low-value products like … Read more
Software II _ Scanning Wood Waste
Github : https://github.com/j-albo/scanning-wood-waste INTRODUCTION Currently, only 15% of wood waste is recycled globally, while up to 60% of felled trees remain unused. Many irregular pieces that do not meet industrial standards are discarded without leveraging their structural and aesthetic potential. Our goal is to rethink these waste materials through scanning, analysis, and digital transformation, converting them into … Read more
Scanning for Reconstruction: Non Planar 3D printing
Introduction In this exercise, our objective was to scan a physical object and use the acquired data to generate a toolpath for non-planar 3D printing. To achieve this, we integrated tools such as Grasshopper, Python, and ROS (Robot Operating System) and conducted multiple tests to optimize the scanning strategy and post-processing. Methodology To achieve non-planar … Read more
Guess the Cup: Robotic Track + Respond
Introduction to Robotic Operating Systems Github repository: https://github.com/sashakraeva/MRAC-ur-perception Introduction his course provided a thorough introduction to the Robot Operating System (ROS), teaching us essential skills in robotic software development. We learned about key ROS concepts like nodes, topics, messages, and services. Using robotic perception as case studies, we understood how ROS connected robots, sensors, and … Read more
Fan Only: A Cataloguing Approach to Glazing
Introduction The exploration of robotic fabrication with traditional techniques has become increasingly important in the ceramic industry, opening up new possibilities for innovation, efficiency and mass production. This research, in collaboration with Heatherwick Studio, bridges traditional artistry and robotic innovation, using only a fan brush to explore creative possibilities in ceramic glazing. Design Methodology The … Read more
BANDY.DUCKS_2.1_Robotic Glazing Choreography
Introduction This project was done in collaboration with Heatherwick Studio. Our starting point was a problem that emerged when patterned ceramic tiles were deployed at scale. Specifically, factory-produced tiles create repetitive patterns, which detract from their crafted intricacy. On the other end of the spectrum, hand glazing is a highly skilled and time-consuming process that … Read more
HAND CRAFT TRANSCRIBER
github: https://github.com/intellection-mrac/tres_mosqueteros.git 1. Intro When we think of craftsmanship, we imagine a world of deep expertise—one that is developed differently from the academic theories taught in universities. Craftspeople spend years under the guidance of masters, becoming part of a lineage that passes down specialized knowledge honed through time and experience. This process is more than … Read more
YAKISUGI.TORCH
Github : https://github.com/MRAC-IAAC/YAKISUGI.TORCH Overview This project combines a thermal camera and an ESP32 to capture and analyze thermal data and distance measurements. It was developed as part of the YAKISUGI Torch Project, a system designed to optimize and standardize the traditional Japanese wood-burning technique for enhanced durability, pest resistance, and waterproofing. About the YAKISUGI Method: The YAKISUGI … Read more
(re)bar; a theoretical context for recycled reinforcement steel bars
dba Re2bar, LLC. Course Overview While the Robotic in Construction Term II Studio Course focuses on means and methods of robotic processes for sustainable materials, this term’s Applied Theory course, Theory and Contexts, fosters analytical thinking about how these materials may be relevant in the industry, addressing the sector’s resource waste (35% EU total) and … Read more
Timber Narratives
Leveraging Computer Vision for Sustainable Design with dimensional waste timber Building upon the established design principles of disassembly explored in the prior semester, Timber Narratives this semester investigated the potential of computer vision and image analytics to further optimize material conditioning and manufacturing processes for dimensional waste timber. This iterative approach aimed to integrate data-driven … Read more
ReWeave 2.0
The Context Aim State Of The Art The Workflow System Architecture Robotic Cell Scanning – Robotic cell Scanning Nesting – Initial Experiments Nesting Custom logic Iteration A Nesting Custom logic Iteration B Binder – Geopolymer with alkaline activators – Sodium silicate Binder – Geopolymer with alkaline activators – Sodium silicate and Sodium hydroxide Binder – … Read more
Reliving
State of the Art Raw Timber and AEC Industry Wood waste is often disregarded in the wood industry and the construction industry. Majority of wood used in construction is sawn and processed wood that not only generates waste on its production but it is also associated with high CO2 emissions, because of the embodied energy … Read more
