Within the current global context of rapid change, integrated with the potentials of digital technologies, IAAC’s Master in Advanced Architecture (MAA) is committed to the generation of new ideas and applications for Urban Design, Self Sufficiency, Digital Manufacturing Techniques and Advanced Interaction.
In this context IAAC works with a multidisciplinary approach, facing the challenges posed by our environment and the future development of cities, architecture and buildings, through a virtuous combination of technology, biology, computational design, digital and robotic fabrication, pushing innovation beyond the boundaries of a more traditional architectural approach.
NARRATIVE Back to Zero is a regenerative concept that targets oil refineries and other aging infrastructures that pollute our world. The narrative is inspired from the “skin in the game” concept, and calculates lifetime co2 emissions for high emitting “hosts”, which then becomes a target for that same “host” to sequester through the carbon sequestration … Read more
How can we map the confluence of humans and architecture? concept sketches design flow bill of materials arduino schematic code trial: distance / angles open position closed position
Future landscape The Green Cone is an experimental environmental project designed to isolate a landscape area within a translucent cone, simulating a winter garden effect. The objective is to raise the internal temperature by 1.5°C, mimicking the predicted global temperature increase expected by 2050 due to climate change. By recreating these conditions, the Green Cone … Read more
This term, we explored three Digital fabrication techniques: CNC Milling, Laser Cutting, and 3D Printing. Our objective was to create A Cabin Integrating and investigating the characteristics of each technique. Concept The waffle cabin, designed for future human use, is tailored for different terrains, including beach, desert, forest, and plain regions. The primary structure of … Read more
DIGITAL FABRICATION 3D Printing | CNC Milling | Laser Cutting 3D PRINTING As we embarked on this three-week journey of digital fabrication, we began with 3D printing in the first week. Our goal was to create something that could be integrated with our other techniques in the weeks to come. To maintain flexibility and openness … Read more
Design & Concept For our project titled “A Cabin for the Future”, we focused on designing an innovative roof structure utilizing laser cutting technology. We aimed to challenge ourselves by opting for a curved roof created through the technique of ‘folding’ an 8mm polypropylene sheet. This approach allowed us to explore the structural potential of … Read more
In this term, we had the opportunity to explore the three distinct fabrication techniques- CNC Milling, Laser Cutting and 3D printing – which resulted in the production of our cabin components CNC MILLING “Diamtic Echoes” A wall was created with layered cutouts and a grid system to add depth. In order to experiment with material … Read more
“First Life, then Spaces, then Buildings, the other way around never works” – Jan Gehl The proposal is an intervention at the site situated in Diagonal Mar, neighborhood, inspired from the fundamental idea of Placemaking. The intervention goes beyond development, aiming to activate the site and create a vibrant community. Grounded in functionality, the approach … Read more
Marine Oasis Creation Through Plastic Decomposition Implementing a Symbiotic Relationship with Aspergillus Fungi To Restore Ocean Deserts Keywords: Plastic decomposition | Aspergillus fungi | Lichen | Cyanobacteria | Marine ecosystem | Garbage Patch | Degrowth | Coral reefs | Ocean deserts | Habitat restoration The DecompAsper stands out as an innovative device that, through the synergistic … Read more
Oman Pavilion, nestled in the mobility district, commenced its construction journey in October 2019.. THE CONCEPT Cradled within the Mobility District, the Oman Pavilion embarked on its construction voyage in October 2019. Embracing the theme ‘Generations of Opportunity,’ the Pavilion encapsulates the narrative of Luban, Oman’s revered treasure, tracing its life cycle through compelling storytelling.” … Read more
A lightweight architecture completely 3D printed by a printer farm The Trabeculae Pavilion fuses advancements in 3D printing with bio-inspired computational design. The synergy of design, material and manufacturing technologies allowed the conceptualization of an innovative construction technique based on an additive process which builds architectural forms conceived with a load-responsive material organization. Concept The … Read more
“Artificial sun” is a light installation that originated from a dark, cold winter walk in Berlin. Berlin, one of Europe’s liveliest and youngest cities, is renowned for its vibrant parties and general positive atmosphere.However, when winter arrives and the days grow shorter, the city seems to go into hibernation, leaving its streets cold and empty. … Read more
The idea is to used the design module which created in G2- Bio tech morphogenesis studio and make a adaptive shading structure using Programming & Physical Computing. Concept The Innovative algae panels integrated into structures enrich the surrounding air with oxygen through photosynthesis. Complementing this, kinetic shading devices dynamically adjust based on sunlight levels, efficiently … Read more
With Arduino being in the front leg to provide automation to a concept of Biomimicry. Applications – Animation made with Blender 4.0 Further Studies in-progress and will be updated promptly. Thank you
This term, the exploration of three fabrication techniques—Laser Cutting, 3D Printing, and CNC Milling—led to the creation of three vertical facade prototypes. Drawing inspiration from organic movements and waves, our laser-cut design explores the interlocking techniques with Polypropylene and acrylic.The 3D printed geometry also explores the interlocking, this time as a mobility tool, creating a … Read more
LASER CUTTING I INTERACTIVE FACADE An interactive facade system crafted using the precise technique of laser cutting. This project is a testament to the harmonious blend of creativity and technology. Our journey began with a vision to create a facade system that was not only aesthetically pleasing but also interactive, adding a dynamic element to … Read more
Laser Cutting – Pulsing Bloom Inspired by the dynamic movement of flower petals as they bloom, the panel would be part of a kinetic facade that mimics nature and interacts with its environment. Technical Drawings Production and Material Data Final Outcome Visualization as a Facade Element 3D Printing – Gyroid as a Vertical Element Concept … Read more
The Responsive Rainwater Catchment System (RRCS) is a proposed system to collect rainwater, reacting to environmental factors through sensors and actuators. The system is imagined as an inverted “umbrella” that is usually closed, and upon sensing rain opens and begins collecting rainwater. Reference: ThinkPhi It has as a priority to collect rainwater without blocking sunlight … Read more
Group Z.2 Origami – LASER CUTTING Taking inspiration from light-filtering facade systems such as that of the SDU Campus Kolding by Henning Larsen, Al Bahr Towers by AEDAS, and the Japan Pavilion for Expo 2020 by Yuko Nagayama and Associates, ORIGAMI is a facade prototype composed of a grid system to host panels or ‘flowers’ … Read more
Group Y1 A series of experiments, to reflect on internality, movements away from the outside and to look upon it. A swift movement which engulfs you, a series of lines to project your light through, an open face held in deep space by many arms. There is nothing outside to look at, if you don’t … Read more
As an underlying theme we chose to explore the various movements of water, as a catalyst that drives each of our fabrication process. Laser Cut – Oscillation | 3D Printing – Coral Growth | CNC Milling – Ripple Effect LASER CUTTING | OSCILLATION The concept behind this design gets its inspiration from oscillating waves … Read more
Vertical structure responsive to temperature changes CONCEPT The project proposes a vertical system that responds to temperature differences to visualize these changes interactively. Its main objective is to create diverse interactions with users through the response to temperature changes. The foundation of the system relies on the use of flexible membranes that expand and compress, … Read more
Over the span of the Digital Fabrication course, we actively explored and examined the possibilities and constraints inherent in the three fabrication methodologies concerning both design and manufacturing. Throughout this process, we conducted experiments involving various materials and machines, employing CNC Milling, Laser Cutting, and 3D Printing techniques. Our aim was to gain a comprehensive … Read more
