Within the current global context of rapid change, integrated with the potentials of digital technologies, IAAC’s Master in Advanced Architecture (MAA) is committed to the generation of new ideas and applications for Urban Design, Self Sufficiency, Digital Manufacturing Techniques and Advanced Interaction.
In this context IAAC works with a multidisciplinary approach, facing the challenges posed by our environment and the future development of cities, architecture and buildings, through a virtuous combination of technology, biology, computational design, digital and robotic fabrication, pushing innovation beyond the boundaries of a more traditional architectural approach.
NARRATIVE Back to Zero is a regenerative concept that targets oil refineries and other aging infrastructures that pollute our world. The narrative is inspired from the “skin in the game” concept, and calculates lifetime co2 emissions for high emitting “hosts”, which then becomes a target for that same “host” to sequester through the carbon sequestration … Read more
How can we map the confluence of humans and architecture? concept sketches design flow bill of materials arduino schematic code trial: distance / angles open position closed position
Future landscape The Green Cone is an experimental environmental project designed to isolate a landscape area within a translucent cone, simulating a winter garden effect. The objective is to raise the internal temperature by 1.5°C, mimicking the predicted global temperature increase expected by 2050 due to climate change. By recreating these conditions, the Green Cone … Read more
This term, we explored three Digital fabrication techniques: CNC Milling, Laser Cutting, and 3D Printing. Our objective was to create A Cabin Integrating and investigating the characteristics of each technique. Concept The waffle cabin, designed for future human use, is tailored for different terrains, including beach, desert, forest, and plain regions. The primary structure of … Read more
DIGITAL FABRICATION 3D Printing | CNC Milling | Laser Cutting 3D PRINTING As we embarked on this three-week journey of digital fabrication, we began with 3D printing in the first week. Our goal was to create something that could be integrated with our other techniques in the weeks to come. To maintain flexibility and openness … Read more
Design & Concept For our project titled “A Cabin for the Future”, we focused on designing an innovative roof structure utilizing laser cutting technology. We aimed to challenge ourselves by opting for a curved roof created through the technique of ‘folding’ an 8mm polypropylene sheet. This approach allowed us to explore the structural potential of … Read more
In this term, we had the opportunity to explore the three distinct fabrication techniques- CNC Milling, Laser Cutting and 3D printing – which resulted in the production of our cabin components CNC MILLING “Diamtic Echoes” A wall was created with layered cutouts and a grid system to add depth. In order to experiment with material … Read more
TIMBER SENSING TECHNOLOGY A material system combining timber and graphene, replacing traditional sensors through graphene’s sensing capabilities. This innovative approach allows first, real-time tracking of deformations inside the wood. Second, creating a digital twin that improves maintenance efficiency in the operational phase. Third, providing a detailed service life passport, this system supports reuse and reduces … Read more
ChromaEnergon represents an innovative approach to student housing architecture that transcends conventional design paradigms tapping the potentials of climatic energy and thermochromic pigments. This concept leverages verticality, slenderness, and dispersed tower structures to create dynamic living environments. By strategically mapping energy into various spaces through the skin which the facade, ChromaEnergon aims to generate unique … Read more
This square building was designed by Elies Regent in neo-Gothic style. From thi lodge the reservoir keeper controlled water levels and managed the opening and closing of the dam gates. This building has been restored as ,faithfully as possible to the original. At present the ground floor hosts an exhibition of the reservoir’s history and … Read more
SEMINAR OVERVIEW ROBOTIC SIMULATION FABRICATION PROCESS DESIGN PROPOSAL CONTEXT DESIGN DRAWINGS WORKFLOW STRUCTURE Robotic Simulation – of Panel Cutting and Placing based on Design RENDERS
Segmented Shell Structures with Cork Panels: Design, Robotic Fabrication and Assembly “SilentShell” explores the use of cork for sound absorption in creating buffer partitions within the IAAC workspace, employing a shell structure concept. The design features a wooden frame with cork panels, fabricated through a combination of robotic and human efforts. The process includes preparing … Read more
Design References Design Simulations Cladding Composition The Sandwich Panel is a combination of a top 6mm Polycarbonate Sheet with Dry Insulation and Cork forming our inner layers and to finish it off with a 6mm thk Polycarbonate Sheet at the bottom. Fabrication Process Using plywood as a base for dowels, which would serve as lateral … Read more
SITE The Uintah and Ouray Indian Reservation DESIGN PROCESS Form Finding and Computational Elements FORM FINDING Massing FORM FINDING Perforations FORM FINDING Decorative Perforation – Spikes FORM FINDING Columns FORM FINDING Split Columns FORM FINDING Mezzanine FORM FINDING Interior Space SIMULATION AND OPTIMIZATION FINAL PROPOSAL FINAL FABRICATION FINAL RENDERS
Balloon-Driven Spatial Alteration Phenomenon: What is Pressure? Pressure and Volume are inversely relatable. When one quantity increases, the other decreases proportionally. If the volume of the space is increased, the pressure inside the volume is decreased. This is applied in pneumatic structures and building environments to balance the indoor environment and structural stability. Our project … Read more
GAUDI’S CAT pavilion is inspired by the geometry of Antonio Gaudi – famous Catenary arches. The structure of the pavilion consists of a central space under the canopy and an open part above. Catenary arches are located in three parts of the pavilion, serving as entrances to it, and elements of Catenary arches are also … Read more
CONTEXTUAL FRAMEWORK ELEMENTS OF RESPONSIVENESS ARID LANDSCAPES INSPIRATION – LIGHT | DUST INSPIRATION – WATER CONCEPTUAL PROTOTYPING CORE DESIGN AXONOMETRIC PERSPECTIVE SECTIONAL PERSPECTIVE CONDITIONAL MAPPING ELECTRONIC LAYOUT EXECUTION PROCESS VISUALISATION RENDERS
Non planar 3D printing cork based biomaterial CORK.CATENATION employs the novel methodology of non-planar 3d printing using Cork as the bio-material. The final outcome is a connection of interconnected lattice structures- broken down into modules that can be assembled to form a building skin that can morph according to the surface topology and solar radiation results.
Concept We aim to design an environmental responsive facade that provides shelter for users in public spaces. Our facade aims to explore different materials that will behave differently based on the sensory information that the weather conditions of the city or location provide. It will be reacting to local light, rain, temperature and weight levels, … Read more
BentArc is a project crafted during the first term of the Digital Woodcraft Seminar. The site is at the Vallvidrera reservoir, situated on the outskirts of Barcelona. It was designed in 1865 for a hydraulic project that was carried out to bring drinking water to the old town of Sarrià. Today it is no longer used to supply water … Read more
