Protected: What is Advanced Air Mobility? [VOL. II]
There is no excerpt because this is a protected post.
Inverted Layered Truss
Case Study The Inverted Truss Retail. Taipei City, Taiwan B+P Architects Martha’s Vineyard Airport Terminal West Tisbury, MA Fennick McCredie Architecture Design Proposal Perspective View – Frame Only Perspective View – With Roofing Maintenance Roof Load: 270 kgf Frame Mass Weight: 635 kgf Wind Load: 1 kN/m2 Front View Section Axonometric View
Follow Me
Aim To explore innovative parametric tiling designs through the utilization of robotic tiling setups. The project aim is to utilize the functions of COMPAS framework and its extensions for robotic planning. Also, to incorporate computer vision and scanning information into the tiling process to enhance precision and efficiency. Design Logic Inspired by the idea of … Read more
NEUMATIC LIQUID COLLISION
Introduction to Neumatic Colloids Nematic colloids are materials with perpendicular surface anchoring embedded in planar nematic liquid crystal (NLC) cells. Topological defects, such as point defects and disclination lines, are a necessary consequence of broken symmetry in the system. In nematic liquid crystals (NLCs), defects manifest as isolated points and disclination lines, which can form … Read more
What is creativity?
Creativity is often seen as the ability to transcend traditional ideas, rules, patterns, and to create meaningful new ideas, forms, methods, interpretations. But, can we confine its vastness to mere definitions? Furthermore, can the creative output of cities be quantified? A notable attempt to do so was made Inkifi. They composed a data based ranking … Read more
Shelf-Scape
At the request of STORE STORE in London, we developed a proposal for a timber structure roof for an existing garage located specifically in Clissold Crescent, Hackney. The objective is to transform the space into a workshop. The project presented a unique challenge as it is planned in phases, necessitating a demountable design that can … Read more
Truss and Roof Health
ROBOTIC SOLUTIONS FOR 3D SPACE ANALYSIS AIM This workshop ran in collaboration with Noumena and IAAC where we were introduced to a environmental scanning and data processing workflows which combined the use of photogrammetry and point-cloud data. The site of the study was at IAAC’s new building which is yet to be constructed. From this … Read more
Wildlife Museum – an Architectural Cocoon
Spanning across an expansive natural sanctuary in Pozzuoli, Italy, the site for our study was equally challenging and interesting. The valley-like topography was crowned by a lake in the middle. The programme of imagining a wildlife museum at this site prompted us to think outside the box, to incur minimum impact on the site while … Read more
Timber Lattice System – A Tale of Cairo’s Rooftops
This research aims to explore the application of timber lattice systems on roofs in Cairo, Egypt. Before delving into the project itself, a thorough review of relevant references was essential for a better understanding of the system. The building analyzed was the Sunny Hills Cake Shop, designed by Kengo Kuma and Associates. Characterized by a … Read more
Wooden Elegance: Crafting a Timeless Table
AGENDA The objective of this course was to design elements for the upcoming exhibition Macquina Climatica, in Parque de la Ciutadella, renovated to serve as an exhibition space; this historic precursor to the emerging paradigm of urban agriculture is currently under construction. For this course, our group was assigned to design a table 4.5m long … Read more
Protected: What is Advanced Air Mobility? [VOL. I]
There is no excerpt because this is a protected post.
“Timber Narratives”
Aim To develop a modular system for seamless automated assembly and disassembly, specifically tailored for the reclamation and repurposing of planar, semi-standardized waste materials ,and also to foster circularity by maximizing resource efficiency and ensuring a sustainable end-of-life use for products within the system. Context State of the art Methodology Assembly and disassembly process by … Read more
Timber Showroom in Trento, IT
Timber Showroom in Trento The Project investigates generative design approaches for optimizing timber construction Systems on both The Support’s level (Tree structure that distributes puncture forces and achieves wider spans) and the Slab’s level (generative Timber Slab reinforcement that follows the Principle Moment Lines generated from FE simulations on pre-given Supports). The objective of the … Read more
Clay Virtuoso
How might we improve clay 3D printing by integrating automated post-processing techniques and hybrid workflows?Our goal is to implement craftsmanship techniques to robotic processes to elevate surface finishes & improve dimensional accuracy to create new opportunities for the mass customization of clay. Introducing our project Clay Virtuoso. Our project focuses on how might we enhance … Read more
From Pollution To Pollination
1. Introduction Urban air quality is a pressing concern, being the result of both natural elements and human-induced pollutants. The city of Barcelona grapples with local pollutants like NOx and PM10, primarily caused by ground transport and industrial activities. While current policies focus on mobility solutions, the project questions the need for complementary approaches. The … Read more
