Within the current global context of rapid change, integrated with the potentials of digital technologies, IAAC’s Master in Advanced Architecture (MAA) is committed to the generation of new ideas and applications for Urban Design, Self Sufficiency, Digital Manufacturing Techniques and Advanced Interaction.
In this context IAAC works with a multidisciplinary approach, facing the challenges posed by our environment and the future development of cities, architecture and buildings, through a virtuous combination of technology, biology, computational design, digital and robotic fabrication, pushing innovation beyond the boundaries of a more traditional architectural approach.
Abstract Using Ultrasonic sensor for detecting the distance and display the value at the LCD screen, while under certain value the Microservomotor rotates 90 degrees. Also, detecting the light by using a Light sensor, which values is being displaying to the LCD screen throw the message ‘dim’ or ‘bright’ light. BoM (Bill of materials) Code … Read more
Project Concept The idea was to create a system that measures the surrounding temperature and humidity and then displays it on a backlight lcd screen. It also checks if the temperature is out of limits range and starts an alarm, as well as displays a warning on the screen. This system could be used in … Read more
“Do electronic ‘cats’ dream of bluetooth mouse?” Just like a pet cat, it will run around in random directions around your house and also away from you. But this is not a cat. It’s a small ‘robotic’ pet that will keep you company and not get bored. Unlike a cat, it won’t run into things … Read more
CONCEPT The project aims to operate a smart water pump device that can be used in domestic, commercial, and agricultural applications. It has sensors that are switching outputs on and off according to the requirement and monitor the water level in a tank or well. Reducing and optimizing the usage of water, energy and time. … Read more
Abstract The initial intention is to create a control system for interior space conditions. A space has temperature around 20-25°C and humidity percentage of 50-60%. Assuming that this system reads the temperatures and the humidity percentage. If the conditions are good, then, the users can be informed by the LCD screen and also by the … Read more
The idea of project was to create a system with ultrasonic sensor, which detects a subject within specifyied distance and ligths up the LEDs in predetermined order. There are two options of output (two codes): the light is moving from LED to LED or they lighten up gradually, so when the object is next to … Read more
Concept The idea of the project is to use the ultrasonic sensor to measure the distance of an object in inches. The servo meter will point towards the corresponding inch number when the object is placed at a particular distance from the ultrasonic sensor. At the same time, when the object is placed at 1 … Read more
Concept The aim of the project is to develop as lighting system that will be responsive and interactive to its surrounding people’s movements. And to make that happen, I have used the ultrasonic sensor as a proximity sensor to measure the distance of people and their movements. As a next step of this project, we … Read more
Safety Detectors on Helmets for Motorcyclists, Bikers and Skaters. The Smart Helmets aim at providing Safety to Motorcyclists, Bikers and even Skaters, to avoid crashing into a car or any object by detecting the distance of the object and light intensity from cars or other vehicles and alerting the rider with the help of buzzers … Read more
This project remakes simply key passcode for the door locks. You should type the correct password and the lock will open. If entered the wrong password 5 times, it will give an Alarm sound. Then have to press the # button to reset the password. Main code
Concept The project’s goal is to create a tensile shaded seating arrangement in which the tensile member bends to provide shade below depending on whether someone is seated there and whether it is day or night. Workflow A cable that is being tugged by a servo motor causes the tensile member to bend. And two … Read more
Sunfollower is a project inspired by the movement of sunflowers. Solar panels are normally positioned towards the cardinal point with the greatest solar incidence, but throughout the day a lot of energy is lost by this fixed positioning. The idea is to create a public installation, a mixture of a public lamppost, with benches where … Read more
Concept Creating a circuit based on operating principle of distance detection and on the usage and applications of ultrasonic sensors in PAS (parking assist) applications. Workflow Using an ultrasonic sensor as in input which measures the distance to obstacles (walls, etc.) and reports their proximity to the driver. PAS basic operation Pulse signals are transmitted, … Read more
Concept: Interactive LEDs is a prototype for a wall that utilizes Ultrasonic sensors and Sound modules from Arduino to create a responsive light installation that allows individuals to interact and engage with it. Sound modules constantly check for any type of sound variation and as soon as an individual make one near the wall, ultrasonic … Read more
