MEDITERRANEAN l Thermodynamics
01. Introduction Venice is a city in northeastern Italy and the capital of the Veneto region. It is built on a group of 118 small islands separated by canals and linked by over 400 bridges.According to the Köppen climate classification, Venice has a mid-latitude four-season humid subtropical climate, with cool, damp winters and warm, humid … Read more
Decarbonization of Housing Stock in EU
Buildings are an intrinsic part of our lives, where we spend most of our time and unfold as human beings. However, through its different forms, the built environment is responsible for the majority of our energy consumption (around 40 %) and a primary source of greenhouse emissions GHG (around 36 %) (Anderson et al., 2015). … Read more
Re-Innovate
The aim of this project is to create a workflow which would help in in the preliminary analysis of physical and materialistic damage using computer vision to enhance sight and successfully pinpoint the defects that can be seen by the camera. The Construction industry follows a very linear approach in terms of usage of materials … Read more
Fibra Terra
Posidonia Oceanica In the Mediterranean, most plant debris is made up of the species Posidonia Oceanica (L.) Delile, asuperior plant that is endemic to this sea. It forms extensive meadows from the shallowest areas of the coast to variable depths, depending on how deep light can penetrate the water to enable photosynthesis to take place. … Read more
1:1 Arched Vault Competition Proposal
The competition proposal of a 1:1 3d printed arched clay vault should be characterized by feasibility in construction. To achieve feasibility, the design of the vault uses bended sheets of wood to carry arches, dwells on strong connections in the infills, and complies by site printing restrictions [4,500 meters of print length alongside a maximum … Read more
Earth 3D Printed Pavilion: Optimized Arches for Self-support and The Fifth Facade
Designing for the 3D printing of a self-supporting Pavilion Background For the Competition phase, the brief asked for a design of geometries that addressed the 5th facade in the attempt to cover or go over and above the average human height. Our proposal attempts to have this brief satisfied without the use of additional/external support … Read more
Fifth Façade and Active Bending Support Competition
Presented is a proposal for building a 3d printed pavilion with biomaterials in Valldaura camp with the main challenge of covering a horizontal 3d printed surface. The project is part of an internal competition during the 3DPA 22/23 postgraduate studies. The winning proposal will be finally built. Several iterations were made as part of the … Read more
MO5 Collaborative Design – Bio Berms
After analyzing the site of Font del Gos we quickly realized that soil erosion was a significant problem.The site is a case study of human interception of an ecosystem, a naturally evolvedlandscape and water stream disturbed by human doings, causing dysfunction.Dry, eroded soil is unable to absorb water properly when raining.This causes a lack of … Read more
A Reflection on Tools for Environmental Analysis
The aim of this blogpost is to summarize the tasks and tools practiced during the course of the S1 Seminar: Digital Tools for Environmental Analysis and reflect on the overall learnings, advantages and disadvantages of each. During the course of the semester, I have explore tools for analysis and optimization of elements related to sun, … Read more
RE:EDU: architecture for emergency
As a target country for our project we selected Ukraine, the biggest European country that is located in the eastern part. Ukraine has 1000 years of history, during which it has been fighting for freedom and identity. In 2013 in Kyiv students started the protest, which evolved into the revolution of dignity, after the president … Read more
Climate Canopy
A new mobility hub for Green square station, Sydney, Australia Climate Canopy is a project about improving the qualities of Green Square station in Sydney, Australia. The Climate Canopy is an open-air timber grid shell creates an urban landmark by framing a new entrance to the station, without interfering with movement and wayfinding. The canopy … Read more
Environmental Responsive School
Introduction As my final submission, I decided to create an environmental school in response to the urban environment. A project that harnesses the mass of the building in a way to enhance spaces for a variety of purposes is the idea behind the design. As a starting point for architectural massing, very basic elements are … Read more
A Test Model for Environmental Design
Introduction Professor Ivan Sutherland at the University of Utah supervised several doctoral students in the 1970’s and 1980’s who later created many of the biggest leaps in computer graphics. These include Ed Catmull who founded Pixar and developed Catmull-Clark Subdivision, Alan Kay who worked on the first graphical user interfaces and the first laptop, Jim … Read more
Twisting comfort optimizer
The climate analysis of Stockholm, Sweden leads to the optimization of a new building with twisting floors for human comfort and solar gain.
Fabrication for Open Nature | Mil Ramas
INTRODUCTION The Design and Fabrication course’s main objective is to orient us towards learning and gaining experience in the use of tools and machines in relation to fabrication. Through designing, manufacturing and prototyping the models we were able to gain hands-on experience on how to fabricate and construct our projects. Valldaura Green FabLab provided us … Read more