Go Back

Postgraduate in 3D Printing Architecture

The Postgraduate in 3D Printing Architecture is a 6-month long intensive programme in the field of additive manufacturing of sustainable architecture. Between the use of advanced technology for construction and the desire to develop a holistic design approach to architecture, we engage with different areas of research that include robotic manufacturing, material research and performance-based design. The programme seeks to develop technological and architectural solutions in collaboration with Industry partners to answer the current needs and challenges of our habitat.

Filtered (6)
Filters
Years
Term
Course
Tag
Show (6)
Cancel

Research : Optimizing Self-Shading in Clay 3D-Printed Geometries

by
3DPA 2024-2025

Hypothesis Optimizing Self-Shading in Clay 3D-Printed Geometries Methodology Incidence vector analysis:Using the position of the sun in Barcelona to simulate realistic shading.Evaluation of different vectors and orientations to identify optimal shading configurations.Geometric modification:Create geometric modifications according to vectors at a precise hour, 14:00 on 21 June and then at different hours 13:00, 14:00, 15:00, 16:00.Adjusting … Read more

The Bóveda: 3d Printed Earthen Housing

by
3DPA 2022-2023

As the world progresses towards sustainable development, the use of 3D printing technology in construction is gaining momentum. One such application is the use of 3D printing to construct earthen buildings, which has several advantages over traditional construction methods. Earthen buildings have been used for thousands of years and are known for their durability, low … Read more

Milà Earth

by
3DPA 2022-2023

Multiple-story 3d printed earth housing in Barcelona Introduction Milà Earth envisions an earth high-rise building located in Milà i Fontanals street on Vila de Gracia, a high-density neighborhood in Barcelona. An architectural proposal for student housing that aims for vertical densification of the central city. Focusing on using local materials and innovative cutting-edge building technologies, … Read more

Trinitat Mosalas

by
3DPA 2022-2023

The proposed student housing is a result of a system, designed with bottom to top approach, where a module design is considered with variable parameters to proliferate into a building proposal which establishes the relationship between structural and spatial organizations. The site falls within the close proximity of some institutions and more importantly close to … Read more

PATI de la VILA: 3d Printed Earthen Housing

by
3DPA 2022-2023
Nader Akoum IAAC 3d Printing Earthen Architecture Housing

At a time when additive manufacturing using earth becomes commercial and available for large scale services, earthen housing becomes more possible without the heavy maintenance required for challenges like spanning, drying, heightening, printing, and durability. A student earthen housing project in Barcelona could vary in many capacities depending on its context of deployment, and in … Read more

Adaptive Support System: Retraction Control in Arched Vaults

by
3DPA 2022-2023
Nader Akoum Architecture 3d Printing Earth

Support & scaffolding during consolidation of clay printing are quintessential to push the boundaries and capabilities of earthen architecture because, with said added support, opportunities for large spans, high arches, aggregated arches, and other structural phenomena arise. The options invented over time are diverse and, regardless of the used material, they can be very insightful … Read more