Within the current global context of rapid change, integrated with the potentials of digital technologies, IAAC’s Master in Advanced Architecture (MAA) is committed to the generation of new ideas and applications for Urban Design, Self Sufficiency, Digital Manufacturing Techniques and Advanced Interaction.

In this context IAAC works with a multidisciplinary approach, facing the challenges posed by our environment and the future development of cities, architecture and buildings, through a virtuous combination of technology, biology, computational design, digital and robotic fabrication, pushing innovation beyond the boundaries of a more traditional architectural approach.

Interactive LEDs

Concept: Interactive LEDs is a prototype for a wall that utilizes Ultrasonic sensors and Sound modules from Arduino to create a responsive light installation that allows individuals to interact and engage with it. Sound modules constantly check for any type of sound variation and as soon as an individual make one near the wall, ultrasonic … Read more

KINETIC FACADE SYSTEM

CONCEPT The concept of the project was to create a system that detects solar radiation throughout the day and adjusts the facade angle accordingly to keep the internal area of the building cool and shaded using a Photoresistor. Also, at the same time to prevent the rainwater from coming inside the building using a water … Read more

Alcohol Detector

Introduction to Programming and Physical Computing Concept The concept described in this project report is aimed to detect the alcohol Level. When this system is installed in the dashboard and detects alcohol through the alcohol sensor, the simulated actuators presented here with a LED, which will be bright up  while a LCD and  will show … Read more

The Dendriform Pavilion

Design Analysis & Concept As the project brief required to reimagine the Serpentine Pavilion by Francis Kere, built in 2017 at the Serpentine Gallery in London, UK, the pavilion was deconstructed and analyzed into 3 of its major elements; the roof, the roof structure and the envelope. The main idea for the reimagination of the … Read more

Recreating the Sarpentine Pavilion.

Darkhan Kadirov Introduction Computational design is not just a tool, but a different approach to the idea of design itself. in past times, it was available only to a few people, but in our time, there is an opportunity for everyone to use it to materialize their thoughts. During this recreate, I took the idea … Read more

FACADE IN MOTION

Adaptive facade

CONCEPT The system consists in creating a facade that moves according to the sunlight. The components of the facade turn with the effect of a motor that is activated according to the environment. An example of an application would be a building in the shape of a bar, having wider sides with east and west … Read more

Reiteration of the Serpentine Pavilion

Abstract The project aims to recreate and redesign the pavilion while taking advantageof computational tools to reiterate and at the same time be tangential to the essence of the pavilion. Francis Kéré’s 2017 Serpentine pavilion is conceived as a micro cosmos. Promoting a sense of freedom and community. Inspired by the tree that serves a central … Read more

Computational design

Parametric facades BRIEF: The aim of this assignment is to choose an existing building with a parametric facade from anywhere in the world and recreate the facade on the rhino using grasshopper algorithms. This undertaking would involve breaking down the chosen facade to comprehend the logic behind its creation and using computational tools to model … Read more

THAYER BRICK HOUSE

recreated by group

Digital Computation I Parametric Façade G8: Ingrid Vaz, Rafaela Müller, Paing Su Ko and Yasmin Jaskulski Faculty: Ashkan Foroughi Dehnavi Diagrams to understand how the façade works Decomposition 01. Façade Perimeter Surface in grasshopper set by a rhino surface 02. Division of the surface 03. Parakeet plug-in to create bricks With the original project, it … Read more

Useless Box

The project aims to use at least two sensors and one actuator to make a program to show the basic concepts of programming and physical computing. Hardware List: My program uses a light sensor and a sound sensor to create a useless loop: Circuit Map: Execution Video: Arduino Main Code

CLOAKED IN BRICKS

Cloaked in Bricks by Admun Design & Construction is a parametric facade made with bricks, located in Tehran, Iran. Without the facade, the building is extremely exposed, with large windows facing the public road and neighboring buildings. The Cloaked in Bricks facade uses vernacular elements such as brick to reintroduce a sense of privacy to … Read more

Parameterizing with Weather

We were assigned to recreate the Serpentine Pavilion 2017 by Francis Kéré, which consists of three main architectural elements: structure, roof and envelope. Each of us was responsible for one of the elements that were homologue and harmonious when assembled together in a final code.  We applied what we’ve learned from this Computational Design course … Read more

Research laboratory at Groninger University

Location: University in Groningen, Netherlands Designed by: UN Studio Original Facade Components Facade A deceptively simple envelope constructed from flat, vertical aluminum slats, which, in places, are twisted outwards in bowed forms.  Tall, vertical undulations are generated, which present an open or a closed aspect depending on the angle under which they are viewed.  This … Read more

Deconstruction & Recreation

Deconstruct The Pavilion The Serpentine pavilion by Franceis Kere consists of three architectural elements: Main Structure, Roof, and Envelope. Main Structure Analysis Taking inspiration from the great tree in Francis Kéré’s hometown of Gando under which members of the community meet to reflect on the day, Kéré’s design is based on creating this sense of … Read more

The Bad Cafe

The Bad Cafe

Introduction architects_Nudesarea_301 sqmyear_2015location_Mumbai, India The architectural component was designed to facilitate yoga, gastronomical experiences, and cultural event spaces for music, art, performances, intellectual discourse and fashion. These activities are stacked vertically over three levels, including an open to sky terrace courtyard. Remotely located from traffic snarls and insulated from typically high levels of air and … Read more

Recreation of the Serpentine Pavilion

Computational design seminar 22-23 MAA RECREATION of the Serpentine pavilion by Diébédo Francis Kéré Deconstruction of the Pavilion Concept and Design Strategies The parametric design of the Pavilion implements the three main components roof, space truss, and enveloper respecting Kere’s original design intention. It represents a nature-based form, growing from the ground and developing into … Read more

Digital Fabrication – Testing & Prototyping

During the 3-week course of the Digital Fabrication course, we tested and investigated the opportunities and limitations that the latest fabrication methodologies provide in terms of design and fabrication. In this regard, we tested different materials and machines using CNC Milling, Laser Cutting and 3D Printing strategies. CNC Milling For the CNC Milling testing and … Read more

Introduction to Digital Fabrication

The introductory Digital Fabrication course proposed a three-week program of how to use three manufacturing methods- 3D printing, laser cutting, and CNC milling in order to understand the correlation between computer data and machine based fabrications. The intensive course dealt with research and study of each of the 3 techniques and led to detailed explorations … Read more

Slicing, Smoothing and Precision

Over the past three weeks, we took the Digital Fabrication introductory course through which we developed a foundational understanding of production techniques such as 3D printing, CNC milling, and laser cutting. In each section, we explored the capabilities and limitations of the manufacturing processes through test prototypes before finalizing the geometries. 3D PRINT_Angle Slicing In … Read more

Digital ways of Fabrication

Abstract The introductory course on Digital Fabrication proposes exploring new production techniques through the relationship between computer data and machine-oriented fabrication. The final purpose was to acclimatize with the three most common digital fabrication processes:  CNC milling, Laser Cutting, and 3D Printing.Our personal exploration of these techniques is here disclosed with these three models, which … Read more

Fabricating with Parameters

During the Introduction to Digital Fabrication course, we aimed to understand the methods of programming 3D Printing, CNC Milling and Laser Cutting machines. To learn the fundamentals of digital fabrication process, we had a certain amount of time for each method. Within the scope of the task, we wanted to get a grip on the … Read more

From Pattern to Modular Solutions

In order to familiarize and introduce us to different types of machinery tools and techniques, our studio was divided to three weeks of learning and exploring different machines related to different forms of digital fabrication. Each week we learned how to design and execute our model on different software related to the fabrication typology. This … Read more

INTRODUCTION TO DIGITAL FABRICATION | GROUP 3

In the Introduction to Digital Fabrication we were required to explore and investigate 3 different manufacturing processes which consisted of using a Laser Cutter, a 3D Printer and a CNC Milling machine. In the laser cutting exercise we looked at how to form a 3D spatial joint from 2D laser cut pieces. Essentially figuring out … Read more

Exploration to digital fabrication

ABSTRACT The digital fabrication studio introduced us to new techniques and ideas through relation between computer data and machine-oriented fabrication. AIM The aim of this course was to explore the design opportunities arising from three common digital fabrication process: 3D printing, CNC machine and Laser cutting. Each of us have designed their own idea and … Read more