Within the current global context of rapid change, integrated with the potentials of digital technologies, IAAC’s Master in Advanced Architecture (MAA) is committed to the generation of new ideas and applications for Urban Design, Self Sufficiency, Digital Manufacturing Techniques and Advanced Interaction.
In this context IAAC works with a multidisciplinary approach, facing the challenges posed by our environment and the future development of cities, architecture and buildings, through a virtuous combination of technology, biology, computational design, digital and robotic fabrication, pushing innovation beyond the boundaries of a more traditional architectural approach.
Abstract The initial intention is to create a control system for interior space conditions. A space has temperature around 20-25°C and humidity percentage of 50-60%. Assuming that this system reads the temperatures and the humidity percentage. If the conditions are good, then, the users can be informed by the LCD screen and also by the … Read more
The idea of project was to create a system with ultrasonic sensor, which detects a subject within specifyied distance and ligths up the LEDs in predetermined order. There are two options of output (two codes): the light is moving from LED to LED or they lighten up gradually, so when the object is next to … Read more
Ultrasonic Sensor with LEDs and Buzzer The Ultrasonic sensor measures the distance of a person. Depending on the distance of the person the the LEDs will correlate with green for far, yellow for medium distance and red for close. The buzzer will also get louder as the person gets closer to the Ultrasonic sensor
00_ABSTRACT Aim of this project is to make a human experience room, this room will have different light settings based on the input presented by people inside the room. Various input considered in this project are mist(Humidity), Heat and smoke, each of these gives a different light setting to the room. The project is developed with … Read more
Concept The idea of the project is to use the ultrasonic sensor to measure the distance of an object in inches. The servo meter will point towards the corresponding inch number when the object is placed at a particular distance from the ultrasonic sensor. At the same time, when the object is placed at 1 … Read more
Natural ventilation system Concept The aim of the project is to program a system for the natural ventilation of facilities with constant problems with high humidity level and temperature such as SPA centers, aquatic sport centers etc. Additionally it would control the air quality and congestion and thereafter automatically control the airflow between the inside … Read more
Introduction to Programming and Physical Introduction Concept My student colleagues from Valldaura having their own yard where they grow vegetables. Due to the various species of animals, such as wild boars and rabbits they have big casualties of the harvest. This Sonar- Alarm starts to work a when the sun sets and the LDR-Sensor overcomes … Read more
The idea of the project was to create an intruder alert system that senses a subject/intruder within the specified distance. As soon as an object (intruder) comes within the specified distance the Red LED will turn on along the Buzzer, informing of the presence of an intruder. The sensor in this case used is the … Read more
CONCEPT The project focuses on Automating cooling based on room temperature. When the Room’s Temperature is above or equal to 25 degree Celsius the fans are automatically switched on to cool the room. BILL OF MATERIALS DIGITAL PROTOTYPE PROTOTYPE WORKING VIDEO
CONCEPT The concept of this setup is to notify when an object is approaching at different distant points LED lights will notify how close the object is by turning off individual light which are set at specific distance, as the object is closer to the desired point. As soon as it reaches the desired point … Read more
Concept The aim of the project is to develop as lighting system that will be responsive and interactive to its surrounding people’s movements. And to make that happen, I have used the ultrasonic sensor as a proximity sensor to measure the distance of people and their movements. As a next step of this project, we … Read more
Safety Detectors on Helmets for Motorcyclists, Bikers and Skaters. The Smart Helmets aim at providing Safety to Motorcyclists, Bikers and even Skaters, to avoid crashing into a car or any object by detecting the distance of the object and light intensity from cars or other vehicles and alerting the rider with the help of buzzers … Read more
concept “Let’s make some noise to activate non-places!” is a project that aims to bring light and life for public places which could be potentially called as non-places in the cities. It is important to mention that non-places once was defined by Marc Augé (1994:72) as a space that can not be defined as identity, relational, … Read more
This project remakes simply key passcode for the door locks. You should type the correct password and the lock will open. If entered the wrong password 5 times, it will give an Alarm sound. Then have to press the # button to reset the password. Main code
Using the SONAR sensor as the main detector . But the default range of the sensor is too small (15 degrees only), so adding a SERVO which controls by a JOYSTICK can allow the system to have more coverage area. If something (enemy) is approaching a certain distance, the SONAR sensor will turn on a … Read more
Abstract The concept behind this simple prototype is to monitor the level of soil moisture, making use of a sensor to be inserted into the soil that will then monitor it. In the situation where the hydration is poor an input will be sent to a buzzer, which will produce an acustic signal, highlighting the … Read more
Concept: Working principal of water level sensor: The working principle of the water level sensor is that when it is put into a certain depth in the liquid to be measured, the pressure on the sensor’s front surface is converted into the liquid level height. COMPONENTS REQUIRED: Schematic diagram: Code: Setup:
UltraSonic and Servo Object detection and sorting CONCEPT Detection of position of objects and using information for sorting using crane mechanism. WORKING OF MECHANISM Servo moves the ultrasonic sensor to detect objects the information is used to control the arms of the crane using the Analog joysticks to move the arms and reach the objects … Read more
Concept The project’s goal is to create a tensile shaded seating arrangement in which the tensile member bends to provide shade below depending on whether someone is seated there and whether it is day or night. Workflow A cable that is being tugged by a servo motor causes the tensile member to bend. And two … Read more
Sunfollower is a project inspired by the movement of sunflowers. Solar panels are normally positioned towards the cardinal point with the greatest solar incidence, but throughout the day a lot of energy is lost by this fixed positioning. The idea is to create a public installation, a mixture of a public lamppost, with benches where … Read more
Abstract The concept of the project analyzed lays in its two main facades: made out of bricks, these show two variations of rotation. The first one takes into account some external curves that act as attractors, the other by rotating the bricks alternately by 45°. Building Overview This office building is placed in a residential … Read more
Concept Creating a circuit based on operating principle of distance detection and on the usage and applications of ultrasonic sensors in PAS (parking assist) applications. Workflow Using an ultrasonic sensor as in input which measures the distance to obstacles (walls, etc.) and reports their proximity to the driver. PAS basic operation Pulse signals are transmitted, … Read more
