The MAA is a visionary master program with an innovative and open structure, mixing diverse disciplines, shaping professionals capable of producing theoretical & practical solutions towards responsive cities, architecture & technology.
The intention of this project was to use two sensors (sound and distance) to ultimately activate a single motor. A sound sensor is first used to trigger an LED. If the LED was previously off, then it is activated. In this case, the distance sensor is also activated.Based on the distance detected, a motor is … Read more
Concept This project has been inspired by the mechanism of Automatic Doors. Automatic doors respond to the movement in front of the activation sensors which opens and closes the door. This mechanism has been replicated in this Arduino project with the help of an Ultrasonic Sonic Sensor and Servo Motor. The LEDs have been used … Read more
CONCEPT The project aims to operate a smart water pump device that can be used in domestic, commercial, and agricultural applications. It has sensors that are switching outputs on and off according to the requirement and monitor the water level in a tank or well. Reducing and optimizing the usage of water, energy and time. … Read more
Abstract The initial intention is to create a control system for interior space conditions. A space has temperature around 20-25°C and humidity percentage of 50-60%. Assuming that this system reads the temperatures and the humidity percentage. If the conditions are good, then, the users can be informed by the LCD screen and also by the … Read more
Concept The goal I set for myself was to create a little Mini-Game on the 8×8 Matrix display that is controlled with a joystick. Inspired by classics like Tetris, the goal is to move a seemingly falling point into the gap that randomly generates at the bottom of the display. After each successful iteration the … Read more
The idea of project was to create a system with ultrasonic sensor, which detects a subject within specifyied distance and ligths up the LEDs in predetermined order. There are two options of output (two codes): the light is moving from LED to LED or they lighten up gradually, so when the object is next to … Read more
CONCEPT The ultrasonic sensor detects the distance of an object and gives a reading of the same on the LCD screen. If the distance is above 10 cm, the Green Led turns ON and if the distance goes below 10 cm the Red Led turns ON and the buzzer produces a noise alerting the user of … Read more
Concept The idea of the project is to use the ultrasonic sensor to measure the distance of an object in inches. The servo meter will point towards the corresponding inch number when the object is placed at a particular distance from the ultrasonic sensor. At the same time, when the object is placed at 1 … Read more
Abstract The project goal is to create a prototype of outdoor space – the terrace equipped with a canopy, which automatically closes when it starts to rain. The lights turn on when the canopy closes and there is no natural light in the room. If a person enters inside, the lights turn on the party … Read more
Concept The aim of the project is to develop as lighting system that will be responsive and interactive to its surrounding people’s movements. And to make that happen, I have used the ultrasonic sensor as a proximity sensor to measure the distance of people and their movements. As a next step of this project, we … Read more
Safety Detectors on Helmets for Motorcyclists, Bikers and Skaters. The Smart Helmets aim at providing Safety to Motorcyclists, Bikers and even Skaters, to avoid crashing into a car or any object by detecting the distance of the object and light intensity from cars or other vehicles and alerting the rider with the help of buzzers … Read more
LED CHASE USING JOYSTICK LED CHASE The project intends to create a chase representing a snake and food chase game. Where we can direct the orientation using X and Y axis and increase or decrease the speed in which the animations makes the snake move by pushing or pulling in the same direction.
This project remakes simply key passcode for the door locks. You should type the correct password and the lock will open. If entered the wrong password 5 times, it will give an Alarm sound. Then have to press the # button to reset the password. Main code
Concept The project’s goal is to create a tensile shaded seating arrangement in which the tensile member bends to provide shade below depending on whether someone is seated there and whether it is day or night. Workflow A cable that is being tugged by a servo motor causes the tensile member to bend. And two … Read more
