Targeted toward students’ future careers in Academia, Start-up, or Industry, the second year of the Master in Robotics and Advanced Construction offers the opportunity to develop a thesis project with the support of IAAC infrastructure, experts and network.
The development of the project will be supported by advanced seminars in Technology, Theory, and Business to bring the proposal state of the art research that can really impact the construction industry.
In parallel to the development of the Thesis Project Studio, the second year of the Master in Robotics and Advanced Construction offers a series of seminars enhancing the theoretical, practical, and digital skills of the students. Students will also have the occasion to join cross-disciplinary workshops to build large prototypes and installations.
Robotic Wood Craft is looking to minimize the raw material foodprint through an efficient repurposing project. The project develops a Data workflow from the scanning of the logs to the Robotic Fabrication and assembly of the pavilion. The final prototype is a post tension structure, with different robot milling joints that maintain the connection in … Read more
The industry of construction creates most of the waste in the world. By 2025 we expect to reach 2.2 billion tons globally. As a solution of this problem, industry 4.0 proposed the Additive manufacturing process, which is looking for the optimization of fabrication and construction adding layer by layer different materials; this process started being … Read more
Introduction Our use of forestry resources has seen an increase in efficiency aimed at standardizing wood, a material that is inherently non-standard and heterogeneous by nature. However, the byproducts generated from this process are predominantly used for energy through combustion rather than being transformed into useful products. As more wood products are expected in construction, … Read more
Furniture has become an essential part of modern day society. Problem Currently an average consumer has a two choices, one to either shop at IKEA and get a generic furniture that every household has or to go for a designer furniture that breaks their bank. With the consumers increasingly looking for products that represent their … Read more
The reference marking system for 3DP processes Problem Traditional 3DP processes lack accurate and reliable reference markers, which can cause errors and inaccuracies in the final print. This can be especially problematic for cyber-physical set-ups that require precise calibration and location of physical geometries on the 3D model. Solution This issue is resolved by Print … Read more
Context Additive manufacturing is growing exponentially in many industries at many levels, pushing towards new upgrades as a competitive alternative by reducing its logistic and production costs and increasing its flexibility and adaptability to the market’s demand. However, there is still an important challenge that it is facing: a gap on matching references between physical … Read more
Context This project seeks for adapting the 3D printing process to known geometries used as supports or external elements as formwork, located in the physical space to save the costs of material and time to produce non reusable ones. These elements are detected through Computer Vision to update the toolpath on the digital model. There … Read more
The construction industry creates a waste that is expected to reach 2.2 billion tons globally by 2025 (Transparency market research). Because of this the market started trying different new techniques to construct with less waste, that is how with the 4.0 industrial revolution came the Additive manufacturing process, that fabricates physical 3D objects layer by … Read more
This project is looking to be a tool that allow the monitoring, messure and documentation of the AM process at the moment of the printing with the help of conventional cameras, analog sensors, robot Data and open source technology Limitless project use different technology process to adquire information and process it. After the creation of … Read more
Objective of this research is to create a robotic scanning workflow that creates high definition meshes for use cases in design and fabrication. Tools Hardware and software used in this research are – UR RobotIntel Realsense D405MoveitIndustrial Reconstruction Initial Tests The initial tests were intended at understanding the parameters of the camera to obtain an … Read more
The efficient utilization of forestry products plays a vital role in sustaining industries such as construction and furniture manufacturing. To meet the demands of mass production, raw materials undergo a process of standardization, enabling streamlined operations and increased output. However, this standardization process results in the generation of valuable by-products such as planar offcuts. These … Read more
Post Tension wood is a project created in different steps. Extracting logs from trees from 12 – 15 diameters, this project scans each piece with the purpose of optimizing the fabrication and reducing the waste. Workflow Set Up & Calibration Production plan
This project focuses on creating a workflow and a tool to automate the design process with irregular wood offcuts.
This project focuses on resolving the algorithmic issues that needs to be tackled in order to automate the design process with irregular wood offcuts.
Main idea for this research is to: Requirements + Setup This package requires a depth camera (for rgb and depth data) and an industrial robot (to broadcast its state, and track movement of the attached camera). The path planning is done with Moveit Motion Planning (moveit_github). The motion planner used for this particular series of … Read more
The state of the art shows our pursue to develop organic geometries using Hyperboloid as design geometry The design takes advantage of the offcuts grain to create a rigid waffle-like structure. Horizontal and vertical members and then connected through notches and screws to stiffen the system. The outer horizontal members of this grid present bark … Read more
How can we improve the additive manufacturing process? According to a panel of experts, this process is not perfect. There are several issues on it, like the time that they normally spend prototyping to have “the perfect piece”. This involves different parameters like speed, pressure, Material Consistency, the calibration of the robot, etc. In most … Read more
The annual construction waste is expected to reach 2.2 billion tons gobally by 2025, to try to solve this kind of problems in this sector we can use the Additive Manufacturing fot the optimization of Fabrication and construction. Key advantages of AM By 2020, the AM sector will grow up to a €13.4 billion industry … Read more
This research thesis seeks for an opportunity to introduce specific human actions in the additive manufacturing robotic process to generate custom and adaptive fabrication flows based on local needs and conditions and set in a cyber-physical working environment that will scan and verify the results before and after every intervention. 1. Framework According to UN, … Read more
The goal of this project is to present a Case Study about an adaptive additive manufacturing toolpath with a robotic arm. The process of printing sometimes brings variations or corrections on its way. The experiment seeks to 3d print a cylinder in clay where in the middle of the process, two pieces of PVC pipe … Read more
