SMART AM
Multi-material Additive Manufacturing solutions. CONTEXT The synergy between clay additive manufacturing and computational design has revolutionized construction, bridging the gap between project design and production. This integration has established a direct-design-build system, facilitating seamless translation of intricate designs into physical structures with precision and speed. This transformative approach enables complex geometries, customization, and cost-effective sustainability … Read more
Introducing need for Bionook
Abstract In response to urgent carbon mitigation challenges and biodiversity loss, a paradigm shift toward manufacturing symbiosis and circular bio-economy is crucial for ecologically sensitive design in urban ecosystems. This study explores the transformative potential of a 3D-printed urban Bionook, incorporating layers of Cross-Laminated Timber (CLT) with a natural-locally sourced soil admixture, to enhance strength, … Read more
Not a Waste: Landfill mine tale
The excessive waste produced in countries worldwide is a grave and unignorable concern. Urbanization contributes to enhanced municipal solid waste generation, harming health and the environment. Landfills, globally emit thousands of tons of methane gas into the air, 30 times more harmful than CO2. Waste is not waste but a resource if managed judiciously. The … Read more
Vertical Openings
This research focuses on the exploration of vertical openings in 3D printed earthen walls. It seeks to answer the question: How to construct medium and large vertical openings in earth 3D printing, providing a maximum opening ratio while minimizing mass and material usage? The objectives of this research are:
Construction – Prototype for Kibaha
Table of Contents Abstract Design Previous Research : LIGHT [ AIR ] Tova vs Kibaha Porosity Compositional grid for Kibaha prototype Technical Challenges Material Recyclability Foundation & Cast Overhangs Edges condition Mesh grids Offsets Approach curves & curve order Ventilation Conclusion Abstract The relatively low mechanical strength of earth means that its use in traditional … Read more
Visualising Genres: Investigating the Combination of Acoustics and Art in Multi-Material 3D Printed Walls
Brief Our curiosity brought us to an intriguing investigation at the nexus of technology, craftsmanship, and acoustics in the quest to elevate spatial design. This blog shares the story of our journey, where we used a cutting-edge multi-material 3D printing technique to produce personalized sound-diffusing walls—a first for the industry. Our concept began with a … Read more
S H A D E S C U L P T
The emergence of additive manufacturing has expanded the horizon for developing designs that are not only more environmentally sustainable but also commercially viable, addressing critical issues in our surroundings. In the field of architecture, multi-material 3D printing opens up a compelling opportunity to imbue intelligence into the surfaces of our built environment by thoughtfully selecting … Read more
TerraCool
State of the Art In the quest for sustainable and energy-efficient cooling solutions, the TerraCool project endeavors to harness the natural properties of clay through the innovative application of multi-material 3D printing technology. This research project aims to develop an advanced evaporative cooling system utilizing seashell ceramic. “TerraCool” is not only a testament to the … Read more
Symbiosis
State Of The Art Utilization of robotics within the additive manufacturing world is becoming more and more standardized as the needs of people and the environment are changing. The construction industry itself has to produce more efficient structures with very little to no waste, and the capabilities of robots to do this are very apparent. … Read more
Heatwave
Additive manufacturing has opened up a vast array of possibilities to the creation of more sustainable but also salable designs that can address critical issues in our environment. In the context of architecture, multi-material 3D printing opens the door for an opportunity to embed intelligence into the surfaces in our built environment through material selection … Read more
Structural Design for 3D Printing
Exploring Boundaries and Breaking Limits: A Glimpse into the Structural Design for 3D Printing Introduction In the inspiring journey through the 3D Printing Architecture (3DPA) postgraduate program, we delved into the enigmatic world of structural design specific to 3D printing during our recent workshop. Grounded in the principles of architecture and pioneering the forefront of … Read more
Illuminating Earth
The TECHNE workshop of the 6th week was an exciting opportunity for 3DPA students to dive into the interaction between mass and lightness in earth-based construction. Traditionally, when we think of buildings made from earth, we imagine thick, heavy walls that don’t let much light through. With the introduction of 3D printing technologies, combined with … Read more
The Machine: From design to fabrication
In this second Techne module we investigated the apparatus of fundamental shapes (such as a cylinder) to grasp the principles and processes of 3D printing with clay, and the parameters and the properties of both machine and materiality. Employing a standard framework that can manifest in variation of a cylinder, four research groups of 3DPA … Read more
Earthen Matters
Overview Building with earth is one of the oldest construction techniques and can be dated back to 7000BC due to the abundance of raw earth all around us. Around the globe different building techniques emerged depending on the composition of the available soil. Understanding its properties is vital for the success of a construction project. … Read more
