Within the current global context of rapid change, integrated with the potentials of digital technologies, IAAC’s Master in Advanced Architecture (MAA) is committed to the generation of new ideas and applications for Urban Design, Self Sufficiency, Digital Manufacturing Techniques and Advanced Interaction.
In this context IAAC works with a multidisciplinary approach, facing the challenges posed by our environment and the future development of cities, architecture and buildings, through a virtuous combination of technology, biology, computational design, digital and robotic fabrication, pushing innovation beyond the boundaries of a more traditional architectural approach.
The purpose of the project was to create a simplified version of car parking technology It is assumed that the sensors are located on both sides of the object (a car). On one side, the Ultrasonic Sensor HC-SR04 measures the distance to the collision object (for instance, a wall). The Output data is displayed on … Read more
CONCEPT The project aims to operate a smart water pump device that can be used in domestic, commercial, and agricultural applications. It has sensors that are switching outputs on and off according to the requirement and monitor the water level in a tank or well. Reducing and optimizing the usage of water, energy and time. … Read more
Abstract The initial intention is to create a control system for interior space conditions. A space has temperature around 20-25°C and humidity percentage of 50-60%. Assuming that this system reads the temperatures and the humidity percentage. If the conditions are good, then, the users can be informed by the LCD screen and also by the … Read more
The idea of project was to create a system with ultrasonic sensor, which detects a subject within specifyied distance and ligths up the LEDs in predetermined order. There are two options of output (two codes): the light is moving from LED to LED or they lighten up gradually, so when the object is next to … Read more
Ultrasonic Sensor with LEDs and Buzzer The Ultrasonic sensor measures the distance of a person. Depending on the distance of the person the the LEDs will correlate with green for far, yellow for medium distance and red for close. The buzzer will also get louder as the person gets closer to the Ultrasonic sensor
00_ABSTRACT Aim of this project is to make a human experience room, this room will have different light settings based on the input presented by people inside the room. Various input considered in this project are mist(Humidity), Heat and smoke, each of these gives a different light setting to the room. The project is developed with … Read more
Concept The idea of the project is to use the ultrasonic sensor to measure the distance of an object in inches. The servo meter will point towards the corresponding inch number when the object is placed at a particular distance from the ultrasonic sensor. At the same time, when the object is placed at 1 … Read more
Natural ventilation system Concept The aim of the project is to program a system for the natural ventilation of facilities with constant problems with high humidity level and temperature such as SPA centers, aquatic sport centers etc. Additionally it would control the air quality and congestion and thereafter automatically control the airflow between the inside … Read more
Introduction to Programming and Physical Introduction Concept My student colleagues from Valldaura having their own yard where they grow vegetables. Due to the various species of animals, such as wild boars and rabbits they have big casualties of the harvest. This Sonar- Alarm starts to work a when the sun sets and the LDR-Sensor overcomes … Read more
The idea of the project was to create an intruder alert system that senses a subject/intruder within the specified distance. As soon as an object (intruder) comes within the specified distance the Red LED will turn on along the Buzzer, informing of the presence of an intruder. The sensor in this case used is the … Read more
CONCEPT The project focuses on Automating cooling based on room temperature. When the Room’s Temperature is above or equal to 25 degree Celsius the fans are automatically switched on to cool the room. BILL OF MATERIALS DIGITAL PROTOTYPE PROTOTYPE WORKING VIDEO
CONCEPT The concept of this setup is to notify when an object is approaching at different distant points LED lights will notify how close the object is by turning off individual light which are set at specific distance, as the object is closer to the desired point. As soon as it reaches the desired point … Read more
Concept The aim of the project is to develop as lighting system that will be responsive and interactive to its surrounding people’s movements. And to make that happen, I have used the ultrasonic sensor as a proximity sensor to measure the distance of people and their movements. As a next step of this project, we … Read more
Safety Detectors on Helmets for Motorcyclists, Bikers and Skaters. The Smart Helmets aim at providing Safety to Motorcyclists, Bikers and even Skaters, to avoid crashing into a car or any object by detecting the distance of the object and light intensity from cars or other vehicles and alerting the rider with the help of buzzers … Read more
concept “Let’s make some noise to activate non-places!” is a project that aims to bring light and life for public places which could be potentially called as non-places in the cities. It is important to mention that non-places once was defined by Marc Augé (1994:72) as a space that can not be defined as identity, relational, … Read more
