Within the current global context of rapid change, integrated with the potentials of digital technologies, IAAC’s Master in Advanced Architecture (MAA) is committed to the generation of new ideas and applications for Urban Design, Self Sufficiency, Digital Manufacturing Techniques and Advanced Interaction.

In this context IAAC works with a multidisciplinary approach, facing the challenges posed by our environment and the future development of cities, architecture and buildings, through a virtuous combination of technology, biology, computational design, digital and robotic fabrication, pushing innovation beyond the boundaries of a more traditional architectural approach.

Filters
Course

FROM WASTE TO TAP

REIMAGINING WATER TREATMENT INFRASTRUCTURE THROUGH BIO-BASED SOLUTIONS PROJECT OVERVIEW WATER STRESS Due to the climate change, inefficient irrigation systems for agriculture, population growth and inefficient water infrastructure, the water stress in the world is increasing. But we question ourselves if water is really a scarce resource or is it just the issue of how the … Read more

Re-clay(m)

The old builds the new Manifest Can we transform construction waste? Can brick waste be a potential upcycled material in an structurally optimized system? Two main factors, the huge amount of CDW and the importance of brick production in Spain, gives us the decision to select our material, the brick waste. We attempt to propose optimized solutions … Read more

Introduction to Digital Fabrication

Group 20 Timber Spatial Joint Concept The aim of this timber spatial joint was to explore the bending technique applied to plywood or MDF using kerfing but also apply it in 2 directions instead of 1. The bent joint is then inserted into the circular wooden sticks and fixed in place using a wooden dowel. … Read more

Form Follows Availability

The construction industry is the number one consumer of global raw materials while being one of the biggest producers of waste in the European Union.In this Research, we aim to explore the possibilities of secondary waste wood (Pallets) based on the notion of discreteness and develop a “Programmable Matter System”.These discrete building blocks can be … Read more

THE FOREST PAVILLION

22/23 MAA01 program COMPUTATIONAL DESIGN G07 “FORCES OF NATURE” The “Forest Pavilion” has a computer generated form composed of multi pipes, where the parameters are based on form finding strategies of point collision (kangaroo parameters), these forms are then once again processed (through kangaroo) to create angularity and turned into strips for digital fabrication. STATE … Read more

Forces of Nature

This project explores the use of various physics simulations using Kangaroo in order to reach a structurally viable design proposal for the IaaC rooftop. The design relies on a combination of specific behaviors (below) that have been calibrated to achieve the desired form.

Forces of Nature

HYPERBOLIC PARABOLOID ROOF This research project in the field of architecture aims to investigate the application of physics simulations in the form-finding process of designing live-interactive installations using Kangaroo, located in IAAC’s rooftop. The design strategy is creating a simple geometry based on forces in compression and tension on different points. The pavilion’s sail-like plane … Read more

FORCES OF NATURE: BLUE SADDLE ROOF

This project was developed in the Computational Design Seminar with the goal of proposing a new installation for the roof of IAAC’s main building using parametric design through Grasshopper and Kangaroo components. The resulting structure aims to improve the quality of the open area, adding shade, light, and shadow effects and creating a base for … Read more

Digital woodcraft

Exploring the unique properties of timber and the fabrication methods associated with it, enabling us to work with complex geometries and find appropriate strategies to realize them. We started out looking at different situations to apply our geometry and potentially make a gapahuk (a building made of wooden materials, originally intended for emergency accommodation), forest … Read more

Forces of nature

Space within spaces Design brief and objective The objective of this exercise is to investigate and build a user-friendly interface that enables real-time manipulation of forces as design parameters, with the goal of using physics simulations as a form-finding tool to replicate real-life behaviors. The investigation will also focus on the development of the construction … Read more

Ho Chi Minh City / Vietnam

Vietnamese Vernacular Architecture Case Study 01 – Jackfruit Village Resort by 1+1 > 2 Case Study 02 – Diamond Island Community Center by VTN Architects Composition Exercise Projection Methods Exploration Pattern Analysis Grid Logic: Superposition of patterns Pattern 01 Pattern 02 Pattern 3 Compiled Grid Catalogue Selected Iteration Development Robotically Fabricated Test Voussoir Robotically Fabricated … Read more

FORCES OF NATURE / Flower Power

The aim of the design was to create a space that evokes a sense of enclosure but is still open and lightweight. This led us to the concept of designing our pavilion from minimal surfaces inspired from geometries exhibited in nature such as plants, mushrooms and corals. The intention was to fabricate it using strip … Read more

Forces of Nature:

“Arachnid Maze” Abstact The aim of the design was to create a recreational space on the rooftop of the main IAAC. The intention was to design a “spider net” inspired by testing materials that included hair, bones, spider webs, and seashells. We simulated our design via physics simulation springs that are able to hold multi … Read more

Timber Pergola

Exploring the Strength and Beauty of Wood Joinery The Timber Pergola project is a study of timber joineries, which explores the use of linear and square shapes with 90-degree angles in the horizontal direction and a 12-degree joint to create a tension structure in the vertical direction. The project is inspired by the Forests of … Read more

FORCES OF NATURE / TWIST FUNNEL PAVILION

Brief “This investigative research project in the field of architecture aims to investigate theapplication of physics simulations in the form-finding process of designing live-interactiveinstallations.”The research objective is to build a user-friendly interface that enables real-time manipulation of forces as design parameters, the goal of replicating real-life behaviors by using kangaroo as a main engine. With … Read more

Forces of nature

Tensile ROOF The aim of the project is to design a Tensile canopy on the IAAC rooftop using computational design tools. State of the art King Fahad National Library / Gerber Architekten Riyadh , Saudi Arabia. PROJECT

Forces of Nature

Force of Nature – Circle of Force Circle of Force emerged as a research project for studying the form-finding process by applying physics simulations interactively with grasshopper plugin Kangaroo. Our objective is to create a user-friendly design where they can spend time on IAAC Pujades Campus rooftop. Design drives: Parameters for Base Geometry The Base … Read more

Forces of nature

Funicular canopy The aim pf the project is to design a funicular canopy on the IAAC rooftop using computational design tools. State of the art BUGA WOOD PAVILLIONICD/ITKEUNIVERSITY OF STUTTGART The BUGA Wood Pavilion celebrates a new approach to digital timber construction. Its segmented wood shell is based on biological principles found in the plate … Read more

VARMÁRLAUG

/VAR-MÁR-LAUG/ Noun The Icelandic word that  translates to a “Warm Spring Pool” INTRODUCING REYKJAVIK Iceland, located in a climatically critical part of the North Atlantic, is an island where earth, air, fire and ice literary meet, and its environs are a key region of ocean–atmosphere interaction, atmospheric dynamics and cyclogenesis. Reykjavík is located in the … Read more

Possibilities of Reciprocal Timber Structures in the Formation of Space

Possibilities of Reciprocal Timber Structures in the Formation of Space is a project that aimed to explore the potential of using reciprocal timber structures to create innovative and functional spaces. The projects main goal is to leverage both traditional artisanal technologies and modern digital tools to create structures that combine beauty, functionality and sustainability. The … Read more