The MAA is a visionary master program with an innovative and open structure, mixing diverse disciplines, shaping professionals capable of producing theoretical & practical solutions towards responsive cities, architecture & technology.
“Do electronic ‘cats’ dream of bluetooth mouse?” Just like a pet cat, it will run around in random directions around your house and also away from you. But this is not a cat. It’s a small ‘robotic’ pet that will keep you company and not get bored. Unlike a cat, it won’t run into things … Read more
This project uses 4 LED lights that turn on according to the position of a joystick. This is done by using ranges and evaluating if the position is inside or outside the range that belongs to each light. Later on, a Servo Motor is added with a double helix, that points at each one of … Read more
//Step 1 interest What interested me in the subject of programming was how complex operations can be decomposed into simple steps. I was impressed by the example of the computer: how the coding system changes at different levels and how multiple combinations come out of binary code. Therefore I decided to study mechanical motion to … Read more
CONCEPT Energy-Saving Lighting System can be implemented on long corridors as well as public spaces of transit which have low motion density and constant lighting is profligate. The initiation of light follows people’s passing and, using the readout from two ultrasonic sensors, the luminance depends on the proximity of people to the power source, the … Read more
The intention of this project was to use two sensors (sound and distance) to ultimately activate a single motor. A sound sensor is first used to trigger an LED. If the LED was previously off, then it is activated. In this case, the distance sensor is also activated.Based on the distance detected, a motor is … Read more
The purpose of the project was to create a simplified version of car parking technology It is assumed that the sensors are located on both sides of the object (a car). On one side, the Ultrasonic Sensor HC-SR04 measures the distance to the collision object (for instance, a wall). The Output data is displayed on … Read more
Concept This project has been inspired by the mechanism of Automatic Doors. Automatic doors respond to the movement in front of the activation sensors which opens and closes the door. This mechanism has been replicated in this Arduino project with the help of an Ultrasonic Sonic Sensor and Servo Motor. The LEDs have been used … Read more
CONCEPT The project aims to operate a smart water pump device that can be used in domestic, commercial, and agricultural applications. It has sensors that are switching outputs on and off according to the requirement and monitor the water level in a tank or well. Reducing and optimizing the usage of water, energy and time. … Read more
Abstract The initial intention is to create a control system for interior space conditions. A space has temperature around 20-25°C and humidity percentage of 50-60%. Assuming that this system reads the temperatures and the humidity percentage. If the conditions are good, then, the users can be informed by the LCD screen and also by the … Read more
Concept The goal I set for myself was to create a little Mini-Game on the 8×8 Matrix display that is controlled with a joystick. Inspired by classics like Tetris, the goal is to move a seemingly falling point into the gap that randomly generates at the bottom of the display. After each successful iteration the … Read more
The idea of project was to create a system with ultrasonic sensor, which detects a subject within specifyied distance and ligths up the LEDs in predetermined order. There are two options of output (two codes): the light is moving from LED to LED or they lighten up gradually, so when the object is next to … Read more
CONCEPT The ultrasonic sensor detects the distance of an object and gives a reading of the same on the LCD screen. If the distance is above 10 cm, the Green Led turns ON and if the distance goes below 10 cm the Red Led turns ON and the buzzer produces a noise alerting the user of … Read more
Ultrasonic Sensor with LEDs and Buzzer The Ultrasonic sensor measures the distance of a person. Depending on the distance of the person the the LEDs will correlate with green for far, yellow for medium distance and red for close. The buzzer will also get louder as the person gets closer to the Ultrasonic sensor
00_ABSTRACT Aim of this project is to make a human experience room, this room will have different light settings based on the input presented by people inside the room. Various input considered in this project are mist(Humidity), Heat and smoke, each of these gives a different light setting to the room. The project is developed with … Read more
Concept The idea of the project is to use the ultrasonic sensor to measure the distance of an object in inches. The servo meter will point towards the corresponding inch number when the object is placed at a particular distance from the ultrasonic sensor. At the same time, when the object is placed at 1 … Read more
Natural ventilation system Concept The aim of the project is to program a system for the natural ventilation of facilities with constant problems with high humidity level and temperature such as SPA centers, aquatic sport centers etc. Additionally it would control the air quality and congestion and thereafter automatically control the airflow between the inside … Read more
Introduction to Programming and Physical Introduction Concept My student colleagues from Valldaura having their own yard where they grow vegetables. Due to the various species of animals, such as wild boars and rabbits they have big casualties of the harvest. This Sonar- Alarm starts to work a when the sun sets and the LDR-Sensor overcomes … Read more
The idea of the project was to create an intruder alert system that senses a subject/intruder within the specified distance. As soon as an object (intruder) comes within the specified distance the Red LED will turn on along the Buzzer, informing of the presence of an intruder. The sensor in this case used is the … Read more
Introduction to Physical Computing-Term I CONCEPT : The basic concept of the project was to use the servo motor, ultrasonic sensor & sound sensor. With the ultrasonic sensor the distance of an object will be detected and the servo motor will rotate from 0 to 90 degree and the door opens .Then the sound sensor … Read more
Concept The idea of this project is to develop a system that will help to create a more comfortable environment within a room. The sensors monitor the light, air gases and proximities. Within this signals the motors will be activated to execute a certain job like being able to open and close the door when … Read more
Abstract The project goal is to create a prototype of outdoor space – the terrace equipped with a canopy, which automatically closes when it starts to rain. The lights turn on when the canopy closes and there is no natural light in the room. If a person enters inside, the lights turn on the party … Read more
CONCEPT The project focuses on Automating cooling based on room temperature. When the Room’s Temperature is above or equal to 25 degree Celsius the fans are automatically switched on to cool the room. BILL OF MATERIALS DIGITAL PROTOTYPE PROTOTYPE WORKING VIDEO
CONCEPT The concept of this setup is to notify when an object is approaching at different distant points LED lights will notify how close the object is by turning off individual light which are set at specific distance, as the object is closer to the desired point. As soon as it reaches the desired point … Read more
