The MAA is a visionary master program with an innovative and open structure, mixing diverse disciplines, shaping professionals capable of producing theoretical & practical solutions towards responsive cities, architecture & technology.
CONCEPT The project aims to operate a smart water pump device that can be used in domestic, commercial, and agricultural applications. It has sensors that are switching outputs on and off according to the requirement and monitor the water level in a tank or well. Reducing and optimizing the usage of water, energy and time. … Read more
Abstract The initial intention is to create a control system for interior space conditions. A space has temperature around 20-25°C and humidity percentage of 50-60%. Assuming that this system reads the temperatures and the humidity percentage. If the conditions are good, then, the users can be informed by the LCD screen and also by the … Read more
Concept The goal I set for myself was to create a little Mini-Game on the 8×8 Matrix display that is controlled with a joystick. Inspired by classics like Tetris, the goal is to move a seemingly falling point into the gap that randomly generates at the bottom of the display. After each successful iteration the … Read more
The idea of project was to create a system with ultrasonic sensor, which detects a subject within specifyied distance and ligths up the LEDs in predetermined order. There are two options of output (two codes): the light is moving from LED to LED or they lighten up gradually, so when the object is next to … Read more
CONCEPT The ultrasonic sensor detects the distance of an object and gives a reading of the same on the LCD screen. If the distance is above 10 cm, the Green Led turns ON and if the distance goes below 10 cm the Red Led turns ON and the buzzer produces a noise alerting the user of … Read more
Ultrasonic Sensor with LEDs and Buzzer The Ultrasonic sensor measures the distance of a person. Depending on the distance of the person the the LEDs will correlate with green for far, yellow for medium distance and red for close. The buzzer will also get louder as the person gets closer to the Ultrasonic sensor
00_ABSTRACT Aim of this project is to make a human experience room, this room will have different light settings based on the input presented by people inside the room. Various input considered in this project are mist(Humidity), Heat and smoke, each of these gives a different light setting to the room. The project is developed with … Read more
Concept The idea of the project is to use the ultrasonic sensor to measure the distance of an object in inches. The servo meter will point towards the corresponding inch number when the object is placed at a particular distance from the ultrasonic sensor. At the same time, when the object is placed at 1 … Read more
Natural ventilation system Concept The aim of the project is to program a system for the natural ventilation of facilities with constant problems with high humidity level and temperature such as SPA centers, aquatic sport centers etc. Additionally it would control the air quality and congestion and thereafter automatically control the airflow between the inside … Read more
Introduction to Programming and Physical Introduction Concept My student colleagues from Valldaura having their own yard where they grow vegetables. Due to the various species of animals, such as wild boars and rabbits they have big casualties of the harvest. This Sonar- Alarm starts to work a when the sun sets and the LDR-Sensor overcomes … Read more
The idea of the project was to create an intruder alert system that senses a subject/intruder within the specified distance. As soon as an object (intruder) comes within the specified distance the Red LED will turn on along the Buzzer, informing of the presence of an intruder. The sensor in this case used is the … Read more
Introduction to Physical Computing-Term I CONCEPT : The basic concept of the project was to use the servo motor, ultrasonic sensor & sound sensor. With the ultrasonic sensor the distance of an object will be detected and the servo motor will rotate from 0 to 90 degree and the door opens .Then the sound sensor … Read more
Concept The idea of this project is to develop a system that will help to create a more comfortable environment within a room. The sensors monitor the light, air gases and proximities. Within this signals the motors will be activated to execute a certain job like being able to open and close the door when … Read more
Abstract The project goal is to create a prototype of outdoor space – the terrace equipped with a canopy, which automatically closes when it starts to rain. The lights turn on when the canopy closes and there is no natural light in the room. If a person enters inside, the lights turn on the party … Read more
CONCEPT The project focuses on Automating cooling based on room temperature. When the Room’s Temperature is above or equal to 25 degree Celsius the fans are automatically switched on to cool the room. BILL OF MATERIALS DIGITAL PROTOTYPE PROTOTYPE WORKING VIDEO
